Hmmm... The thing about going into open firmware is possible. What worries me is that it won't accept the reset PRAM key command anymore. It worked for one chime and then it just stopped chiming. I let go of the keys and it has displayed this problem ever since. I currently have two hard drives in there. One 9GB one hooked to the internal SCSI port and the 50GB one hooked to the SCSI card. The screen never shows anything at all, so no Happy Mac or anything. I doubt if its a hard drive issue, more likely it seems to be hardware or Open Firmware related. I can try a different drive, but if it were a software issue, it should at least get me a display of something.

I'll try that serial connection and see if it helps.

Thanks for the advice!