ADTPro and the //C, having a bit of an issue with them both. — #3

Post #3 by david__schmidt

Source Forum	68kMLA
Category	Troubleshooting
Post Date	Mon, 11 Feb 2008 - 14:01
Original URL	https://68kmla.org/bb/threads/adtpro-and-the-c-having-a-bit-of-an-issue-with-them-both.11629/

Post

Must i use some "specific" null cable JUST made for the IIc? All My IIc does is sit at the prompt and stare at me :?:

Click to expand...

Well, yes and no. You need one that will correctly connect to the back of the IIc... If you have an IIc+, then I still don't know if the same cable that works for an IIgs will work with an IIc+ or not. I have an IIc+ coming in the mail so I will eventually be able to tell for sure.

For posterity's sake:

The IIc+ came, and I ran my tests. Turns out the same pinout that I show on the ADTPro page for the IIgs "printer" cable works for the IIc+ as well. No modifications are necessary.