Thread
What does it mean?
My Indigo Slot-loading iMac G3's CRT tint changes from normal to reddish like every two minutes or less. This has been happening for about a month. Does this mean something is failing?
I won't pretend to be an expert, but I'd say something is definitely wrong with the monitor. You need to replace/fix it quickly, because CRT's are dangerous if cracked or damaged. Shine a flashlight through the casing and make sure the CRT is in good shape before continuing.
-Apostrophe
P.S. That red tint thing also happened to my old TV.
-Apostrophe
P.S. That red tint thing also happened to my old TV.
It wasn't like this before someone stored it for me upside down.
That's probably it, no?
That's probably it, no?
I think you're right. I heard something about it being unwise to store these upside down.
I'm not sure there's a way to fix this without getting into the CRT itself, which is potentially harmful unless you know what you're doing. Maybe you could use another monitor?
-Apostrophe
I'm not sure there's a way to fix this without getting into the CRT itself, which is potentially harmful unless you know what you're doing. Maybe you could use another monitor?
-Apostrophe
Maybe I'll put it in a different case and use an external monitor…
You will have a better idea of the nature and seriousness of the problem if you go to a page like this:
http://www.repairfaq.org/sam/monfaq.htm#moncprobs
Take some comfort from the fact that CRTs (the 'picture tubes') fail much less often than their supporting circuitry does.
de
http://www.repairfaq.org/sam/monfaq.htm#moncprobs
Take some comfort from the fact that CRTs (the 'picture tubes') fail much less often than their supporting circuitry does.
de
Maybe it needs degaussing??
If the change in hue is abrupt, rather than gradual, then the most likely cause is a loose connection or dirty potentiometer. There are several potentiometers for adjusting the gun bias currents. Over time, they can get erratic (you may have encountered something similar, with scratchy audio volume controls). Sometimes, simply rotating them back and forth a few times will fix things (for a time, at least). Similarly, disconnecting and reconnecting connectors will frequently fix problems due to oxidation.
If the hue changes slowly from normal to abnormal, and then slowly back again, then that's a more complicated problem.
And you don't have to worry about what Apostrophe said. A cracked CRT does not display anything. You would only see sparks and hear frightening hisses as the HV circuitry worked its magic on the air that has filled the broken CRT. Furthermore, it is essentially impossible to crack a CRT without knowing you've done so.
If the hue changes slowly from normal to abnormal, and then slowly back again, then that's a more complicated problem.
And you don't have to worry about what Apostrophe said. A cracked CRT does not display anything. You would only see sparks and hear frightening hisses as the HV circuitry worked its magic on the air that has filled the broken CRT. Furthermore, it is essentially impossible to crack a CRT without knowing you've done so.