I have a problem with an Apple IIe I just bought.
It does start with a usual "Apple ][" Screen,
but when a floppy drive is attached the drive starts to run
but it seems not to boot the System.
I get some notes on the screen like:
39DA A=FF X=8E Y=00 P=B6 S=D7
(see photo bellow) and the drive stops after one second and stays silent.
If I use a DOS Master disk I get other notes as I use another "Autoboot" Disk. But the notes stay the same if I use the same disk.
I took out all cards, tried another Apple II Disk Interface, a second drive...
The problem still exists - it seems to be the Logic Board.
Does anyone can explain whats wrong with my Apple IIe ?
It is a French version of the Apple ][e - if I use the switch on the case under the keyboard the Apple starts with an"Apple §*" Screen.
Is this the usual start screen for the french Apple IIe?
It does start with a usual "Apple ][" Screen,
but when a floppy drive is attached the drive starts to run
but it seems not to boot the System.
I get some notes on the screen like:
39DA A=FF X=8E Y=00 P=B6 S=D7
(see photo bellow) and the drive stops after one second and stays silent.
If I use a DOS Master disk I get other notes as I use another "Autoboot" Disk. But the notes stay the same if I use the same disk.
I took out all cards, tried another Apple II Disk Interface, a second drive...
The problem still exists - it seems to be the Logic Board.
Does anyone can explain whats wrong with my Apple IIe ?
It is a French version of the Apple ][e - if I use the switch on the case under the keyboard the Apple starts with an"Apple §*" Screen.
Is this the usual start screen for the french Apple IIe?