Pismo/ Wallstreet battery cells — #10

Post #10 by Bunsen

Source Forum	68kMLA
Category	Peripherals
Post Date	Tue, 1 Jul 2008 - 20:51
Original URL	https://68kmla.org/bb/threads/pismo-wallstreet-battery-cells.13582/

Post

I wonder if you could / super glue the tabs, then use conductive paint to connect the tabs?

You could probably make up a mix of conductive paste with superglue, or preferably a two part epoxy. Thermal paste is often mixed with glue to mount heatsinks.

I found a photographic guide to recelling a Lombard/Pismo battery.

Note though:

Two Years After Doing this Battery Replacement
It has been about two years since I replaced the cells in two Pismo battery packs. These batteries did not last as long as they should have. One pack is completely dead now, and the other only lasts about 30 minutes. I suspect that there is something that needs to be reset when the cells are replaced, but I'm not sure.