Using OF commands, after amending the settings for thermal-info I got the fan to turn on straight after booting, by setting them to 01010200 00000000 01010200 00000000.
With the open firmware dump below of the values for via-pmu / power-mgt could anyone explain what the values present could likely be. i.e. are the set of 4 hex values likely to be 2 sets of values, or 4 separate ones?
I decoded each of the hex values and got 16843264 for hex 01010200 and 1213468963 for hex 48434843. I think these refer to temperature values (perhaps F?).
Any knowledge people may have on this and Open Firmware properties would be much appreciated.
Thanks,
James.
With the open firmware dump below of the values for via-pmu / power-mgt could anyone explain what the values present could likely be. i.e. are the set of 4 hex values likely to be 2 sets of values, or 4 separate ones?
I decoded each of the hex values and got 16843264 for hex 01010200 and 1213468963 for hex 48434843. I think these refer to temperature values (perhaps F?).
Code:
ff918050: /pci@f2000000/mac-io@17/via-pmu@16000/power-mgt
compatible 7669612d 706d752d 393900.. ........ "via-pmu-99"
device_type 706f7765 722d6d67 7400.... ........ "power-mgt"
max-aux-power 00000000 ........ ........ ........ ....
name 706f7765 722d6d67 7400.... ........ "power-mgt"
prim-info 000000ff 00000060 00003e80 00017fb5 .......`..>.....
0010: 0000d607 00000000 00021300 46000220 ............F..
0020: 101400.. ........ ........ ........ ...
registry-name 65787469 6e742d67 70696f31 00...... extint-gpio1.
thermal-info 01010200 00000000 48434843 00000000 ........HCHC....Thanks,
James.