Thread
Targa 2000 rom version 1.3 Nubus
i tried so many combinations but wont work at all on a Q950 and 840AV
targa software 1.3, 2.2.1 , 3,1
system 7.5.1 , 7.6 , 7.6.1 , 8
quicktime 2.1 , 2.5 , 3.0
targa panel wont shown Video setup , and adobe premiere 4.2
wont enable the 'video input'
some veteran cutter can help me pls? very hard to find any documentation
about.
targa software 1.3, 2.2.1 , 3,1
system 7.5.1 , 7.6 , 7.6.1 , 8
quicktime 2.1 , 2.5 , 3.0
targa panel wont shown Video setup , and adobe premiere 4.2
wont enable the 'video input'
some veteran cutter can help me pls? very hard to find any documentation
about.
There are 2 versions of the card, the original Truevision one with a VGA out and 2 or 3 round plugs for A/V and the AVID modified one with VGA out and 2 large rectangular plug for A/V. The truevision drivers will not recognize the AVID card at all (avid used a different daughter card and ROM).
The manual can be found online if you google.
The manual can be found online if you google.
http://web.archive.org/web/20030516064654/www.truevision.com/support/TARGA/2000/NuBus/UserManuals/TARGAMacInstallGuide.pdf
Mentions OS 7.5.5 or later, Quicktime 2.5 or later, Most powermacs.
http://web.archive.org/web/20040701010747/www.truevision.com/support/HTMLPage.asp?HTMLPages_ID=28
Recommended Macintosh System
Apple Quadra 650, 660(AV), 700, 800, 840AV, 900, 950
24 MB RAM or greater (32 MB recommended)
ATTO Silicon Express IV
One or more AV-rated fast/wide hard drives
Apple System 7.5.1 (Later versions may work but have not been tested).
QuickTime 2.1
Apple Power Macintosh 7100/80 and 8100
24 MB RAM or greater (32 MB recommended)
ATTO Silicon Express IV
One or more AV-rated fast/wide hard drives
Apple System 7.6.1
QuickTime 2.5
Mentions OS 7.5.5 or later, Quicktime 2.5 or later, Most powermacs.
http://web.archive.org/web/20040701010747/www.truevision.com/support/HTMLPage.asp?HTMLPages_ID=28
Recommended Macintosh System
Apple Quadra 650, 660(AV), 700, 800, 840AV, 900, 950
24 MB RAM or greater (32 MB recommended)
ATTO Silicon Express IV
One or more AV-rated fast/wide hard drives
Apple System 7.5.1 (Later versions may work but have not been tested).
QuickTime 2.1
Apple Power Macintosh 7100/80 and 8100
24 MB RAM or greater (32 MB recommended)
ATTO Silicon Express IV
One or more AV-rated fast/wide hard drives
Apple System 7.6.1
QuickTime 2.5
i have 2 cards from truevision , one is single board how you described , 1 vga and 2 rounded connectors (input and output) , the oter one is 2 cards
separated phisically but interconeccted by flat cable ..look like SCA80
both have rom 1.3 , and both have same problems , i was thinking bad rom version flashed.
separated phisically but interconeccted by flat cable ..look like SCA80
both have rom 1.3 , and both have same problems , i was thinking bad rom version flashed.
The 2000 is just one card (2 layers), the AVID cards tended to have a cable that conected them to the AVID compression cards.
Have a picture of the cards?
Have a picture of the cards?
Never seen the double card setup before, interesting. The section it attaches to is where the normal compression board would be.
Where did you get that 2 card set? Anything written on them?
I know that the PCI cards had a ROM update for use with the later 720x468 NTSC intead of 640x480. I wonder if somebody used that ROM?
Where did you get that 2 card set? Anything written on them?
I know that the PCI cards had a ROM update for use with the later 720x468 NTSC intead of 640x480. I wonder if somebody used that ROM?
fondamentally are the same card , but one have separate composite input/output , i guess the sandwich one is newer version maybe for to save 1 nubus slot , both cards have printed on it truevision everywhere and at boot time shown
'TRUEVISION' 1,3 ROM splashscreen. i have buy lot of old nubus cpu and pulled out from. since the 1.3 room is very old , i think the first version maybe the ex owners flashed with old rom then making them garbage.
'TRUEVISION' 1,3 ROM splashscreen. i have buy lot of old nubus cpu and pulled out from. since the 1.3 room is very old , i think the first version maybe the ex owners flashed with old rom then making them garbage.
is the 7.5.1 actually free? if ever ..where i can get iso image of it?
http://www.info.apple.com/support/oldersoftwarelist.html#system
7.5.3 is there but its in multiple disks you need to join, so its not an ISO nor bootable. There are also updated to 7.5.5 there.
7.5.3 is there but its in multiple disks you need to join, so its not an ISO nor bootable. There are also updated to 7.5.5 there.
thank you for every info gived , very helpful , next saturday i try again hopefully working.