Actually, I see now a further link on the page cited, "Installing the P5200 logic board," which takes you to a page on which the adapted board is pictured. The photos are not especially good, however, but comparison with a scrap 5200 board (aren't they all?) will give you the general idea. The adapter board does not butt onto the end, but goes an inch or so over the top, and then overhangs by another 2 inches or so. A series of pins connect the two boards together (yes, soldered).
Post #5 by beachycove
| Source Forum | 68kMLA |
|---|---|
| Category | Hardware |
| Post Date | Wed, 19 Nov 2008 - 13:29 |
| Original URL | https://68kmla.org/bb/threads/lc575-micromac-5200-conversion.15650/ |
Post