Funky SE/30 — #8

Post #8 by Dog Cow

Source Forum	68kMLA
Category	Hardware
Post Date	Tue, 20 Jan 2009 - 22:30
Original URL	https://68kmla.org/bb/threads/funky-se-30.15986/

Post

I would suggest having a play about with the brightness, focus, vertical sweep etc controls on the analogue board to see if it makes any difference to the display picture. They are small variable resistors on the board that can be manipulated with a small screwdriver. It is highly recommended to do this with the SE/30 switched off and then switch it on to see if there are any changes.

Yes, this is probably the cause of the rasters. I can get them on my Mac Classic if I adjust the knobs too highly. I recommend doing it with the Mac on so you can see what you are doing. You just need to be very careful then, probably using a plastic screwdriver or gloves. (I used to use gloves in the old days when I was paranoid.)