Ok, thanks.

What I'm going to do...that card comes in two parts: the part in the computer's main compartment, with the port on the outside of the SE, and then the part that connects to the logic board, that in turn connects to the other card. Right now I have a hole in the back of the SE where the port should go, so what I'll do is just put in the 'port part' but leave out the 'logic board part.' The 'logic board part' is REALLY tough to get in and out, so I'll just leave it out. I won't be using an external monitor anyway, so the 'port part' that I leave in will not have a charge running through it since I'm leaving out the 'logic board part.' That way, the hole is plugged with the port, and due to the lack of its connecting counterpart on the logic board, it won't produce any electricity or heat!

-Apostrophe