-Tho polarity of the capacitors is correct its quite clear on the caps which is negative.
-As for the electrolytic goo, it would certainly shortcircuit everything around.
-I cleaned it with a solution to clean pcbs and then as nothing happened put the mb in the dish washer (crazy idea but ive seen it on other posts here).
-the psu gives me 4.95v continuous
- im going to go through the motherboard with a magnifying glass and look for oxidations or cold soldering connections
im not good at all with electronics and its hard for me to translate the power circuit but ill give it a try!
- all those t3 caps could thesy suffer from the same leaking like the bog ones?
-As for the electrolytic goo, it would certainly shortcircuit everything around.
-I cleaned it with a solution to clean pcbs and then as nothing happened put the mb in the dish washer (crazy idea but ive seen it on other posts here).
-the psu gives me 4.95v continuous
- im going to go through the motherboard with a magnifying glass and look for oxidations or cold soldering connections
im not good at all with electronics and its hard for me to translate the power circuit but ill give it a try!
- all those t3 caps could thesy suffer from the same leaking like the bog ones?