Hi, I left it running for about an hour and I got no video at all.Should I just resolder all the connections on the Analog board?

Arghhhhhh I WANT THIS TO WORK!!!

Click to expand...

Follow the good advice already given here, which is to resolder all joints that look suspect. Another thing to consider is replacing the capacitors on the analog board with new ones. By doing this, you will avoid the potential problem of leaking/bulging capacitors in the future. When working near the analog board, yoke, anode cap/lead and video board, make sure you have discharged the CRT to the ground lug first. This will ensure you are protected against serious injury. Possibly more importantly, take it very slow when working inside the machine -- knocking the end of the neck is easily done if you're not careful, and will result in a dead CRT.