My latest eBay conquest arrived, in the form of a pair of G3 Minitowers which I purchased for 30 bucks and got a friend in Victoria to pick up for me... his mother in law (also a nerd from way back in the days of BBS's) just dropped them off to me an our ago after coming back from a 10 hr drive. God bless her! 
The one on the left is a 266 and the one on the right a 300... I actually initially bought these specifically for a CD-ROM bezel, a drive sled, and a drive bay RF plate for my 9600. However the machines are largely complete, and assuming I have one working logic board and one working PSU then I can build a 97% complete G3 minitower (with the exception of the CD bezel as there was only one in the lot which is now on the 9600) needing only some RAM and a hard drive from my stockpile. So I am going to see what I can get to work, and with luck I will have two serviceable logic boards such that I can get a working 300MT and also possibly replace the acid-damaged board in my 266DT, assuming the boards are the same, which they look to be going from memory alone.
The one on the left is a 266 and the one on the right a 300... I actually initially bought these specifically for a CD-ROM bezel, a drive sled, and a drive bay RF plate for my 9600. However the machines are largely complete, and assuming I have one working logic board and one working PSU then I can build a 97% complete G3 minitower (with the exception of the CD bezel as there was only one in the lot which is now on the 9600) needing only some RAM and a hard drive from my stockpile. So I am going to see what I can get to work, and with luck I will have two serviceable logic boards such that I can get a working 300MT and also possibly replace the acid-damaged board in my 266DT, assuming the boards are the same, which they look to be going from memory alone.