Have you used Asanté EtherTalk Installer v5.6.1? Ideallly the software is installed before OT 1.1.1/1.1.2 so that it cannot overwrite OT with older componets. It is by no means essential, but it could be advantageous in being more up-to-the-minute, to steal OT 1.3.1 from an OS 8.1 Install CD.
A visit to Asanté's support may assure you that you have what you need. I find, with Asanté LC PDS NICs in Q605s, there is no need for an intermediary 10Base-T hub between the NICs and the 10/100Base-T switch next up the line in my wider LAN. Depending on your card's model, you may or may not need the hub to compensate for lack of the NIC's autonegotiation.
Without wishing to offend you by referring to the PBO, have you configured the AppleTalk CP to 'see' your NIC rather than the Printer port?
de
A visit to Asanté's support may assure you that you have what you need. I find, with Asanté LC PDS NICs in Q605s, there is no need for an intermediary 10Base-T hub between the NICs and the 10/100Base-T switch next up the line in my wider LAN. Depending on your card's model, you may or may not need the hub to compensate for lack of the NIC's autonegotiation.
Without wishing to offend you by referring to the PBO, have you configured the AppleTalk CP to 'see' your NIC rather than the Printer port?
de