Thread
Goodwill today: one very small, ONE VERY LARGE . . .
I snagged a boxed set of assorted translucent/transparent iMac era candy colored "Mac HD" FDDs today. They'll look nice displayed on the multiple workstation/display shelving system I'm finishing up down in the living room . . .
it's VERY strange to SEE the actual storage media disk inside the plastic . . .
. . . might even get some practical use out of them too!
total cost: $3.00!
The other was a Big@$$ solid oak edged/plywood backed hutch/desk topper for one of the five workstations up in the front bedroom/office/MacHackCentral. Its got some nicely arranged fixed shelves, one short adjustable one and a big wide shelf all across the top. It also has an opening in it for the @$$-end of one of my spare 21" CRTs and an existing wire run out the back, right in the middle of the bottom/back edge.
Not a bad snag at $34.00, certainly couldn't get that much solid oak edge facing/oak veneer plywood (even particle board if that's what it turns out to be, but it doesn't seem to weigh enough for that level of resin content) and a sheet of thin oak veneer plywood for the back for anywhere near that price!
jt =8-D
it's VERY strange to SEE the actual storage media disk inside the plastic . . .
. . . might even get some practical use out of them too!
total cost: $3.00!
The other was a Big@$$ solid oak edged/plywood backed hutch/desk topper for one of the five workstations up in the front bedroom/office/MacHackCentral. Its got some nicely arranged fixed shelves, one short adjustable one and a big wide shelf all across the top. It also has an opening in it for the @$$-end of one of my spare 21" CRTs and an existing wire run out the back, right in the middle of the bottom/back edge.
Not a bad snag at $34.00, certainly couldn't get that much solid oak edge facing/oak veneer plywood (even particle board if that's what it turns out to be, but it doesn't seem to weigh enough for that level of resin content) and a sheet of thin oak veneer plywood for the back for anywhere near that price!
jt =8-D
Very nice! There's really nothing better than being able to have all your machines out and set up and ready for use at any time. 
There's really nothing better than being able to have all your machines out and set up and ready for use at any time.