Thread
Getting a IIci on tah intarwebz.
1) Ensure you properly installed the drivers for your Ethernet card. If you can get drivers from your card's vendor, those might be better than the generic Apple network drivers.
2) Since you're using 7.5.1 and have 8 MB of RAM, I highly suggest installing OpenTransport. It's much easier to configure than MacTCP and has better compatibility with modern routers. You can download OpenTransport 1.1.1 and the update to 1.1.2 in floppy format from the Apple site:
OpenTransport 1.1.1:
Disk 1 - Disk 2 - Disk 3 - Disk 4
OpenTransport 1.1.2 update:
Disk 1 - Disk 2 - Disk 3 - Disk 4
3) After installing, configure OpenTransport to use DHCP (should be enabled by default) and go into the advanced user mode to have it always enabled (instead of TCP/IP only being enabled when it gets used, as it is by default). You can set OT back to simple user mode afterward.
4) Install Netscape 2.02, which is IMHO the best browser for the IIci. It runs nice and quick, while still being fairly compatible with most modern sites. Netscape 3 will also work on a IIci, but it is slow as molasses. Also, 8 MB of RAM is probably not enough to run NS3 stably.
Here's an archive of ancient Netscape releases: link
And for your convenience, here's a direct download link to Netscape 2.02 English for Mac: link
That download is too large to fit on a single floppy, so you might have to work some file splitting magic to transport it onto your IIci.
5) After starting up Netscape 2.02 for the first time, quickly press the Stop button to prevent the browser from loading the default Netscape homepage (and all sorts of hell breaking loose). Go to the settings menu and set a blank page as the default site.
Then go to Security settings and disable Javascript. Javascript in NS2 is outdated and produces gazillions of error messages on most JS-enabled sites. If you want to have any kind of fun with your browsing experience, you'll want to disable Javascript.
Finally, don't forget to click 'Save settings' in the settings menu. Otherwise, the default settings will be restored on the next startup.
If all went well, you should be able to produce something like this:
2) Since you're using 7.5.1 and have 8 MB of RAM, I highly suggest installing OpenTransport. It's much easier to configure than MacTCP and has better compatibility with modern routers. You can download OpenTransport 1.1.1 and the update to 1.1.2 in floppy format from the Apple site:
OpenTransport 1.1.1:
Disk 1 - Disk 2 - Disk 3 - Disk 4
OpenTransport 1.1.2 update:
Disk 1 - Disk 2 - Disk 3 - Disk 4
3) After installing, configure OpenTransport to use DHCP (should be enabled by default) and go into the advanced user mode to have it always enabled (instead of TCP/IP only being enabled when it gets used, as it is by default). You can set OT back to simple user mode afterward.
4) Install Netscape 2.02, which is IMHO the best browser for the IIci. It runs nice and quick, while still being fairly compatible with most modern sites. Netscape 3 will also work on a IIci, but it is slow as molasses. Also, 8 MB of RAM is probably not enough to run NS3 stably.
Here's an archive of ancient Netscape releases: link
And for your convenience, here's a direct download link to Netscape 2.02 English for Mac: link
That download is too large to fit on a single floppy, so you might have to work some file splitting magic to transport it onto your IIci.
5) After starting up Netscape 2.02 for the first time, quickly press the Stop button to prevent the browser from loading the default Netscape homepage (and all sorts of hell breaking loose). Go to the settings menu and set a blank page as the default site.
Then go to Security settings and disable Javascript. Javascript in NS2 is outdated and produces gazillions of error messages on most JS-enabled sites. If you want to have any kind of fun with your browsing experience, you'll want to disable Javascript.
Finally, don't forget to click 'Save settings' in the settings menu. Otherwise, the default settings will be restored on the next startup.
If all went well, you should be able to produce something like this:
Note that I wrote all that from the top of my head, so I might have gotten a few details wrong or maybe even forgotten a step somewhere. I also left a couple of things open for yourself to find out, since your situation is not identical to mine. Let me know if you have any problems.
I have my IIci on the web with a MacSense E440 NuBus ethernet card. I got the ethernet card new on eBay for $12. 
Apparently the onboard video doesn't have sync on green, so multisync monitors generally don't work. I got mine to work, however, by also hooking up to an LCD. I then cycled through the various 640x80 options until the normal VGA monitor worked.
Does anyone have any experience with the correct drivers on a Asante MCNB Rev A?
P/N is 09-00061-03 A3
I looked on Asante's website, and could not find anything on this card.
I have a IIci running System 7.1 and desperatly want to get this to work.
I have no Browser, or no TCP installed as far as I can tell.
P/N is 09-00061-03 A3
I looked on Asante's website, and could not find anything on this card.
I have a IIci running System 7.1 and desperatly want to get this to work.
I have no Browser, or no TCP installed as far as I can tell.
I installed Open Transport on my mac.
I was having issues with the card not being recognized by the installer software, but after some messing around, it was then detected.
I noticed the LED on the back of the card is constantly flashing at consistant intervals. If I power down and put a jumper on the the JP2 leads, the flashing stops.
I'm not sure which setting I need.
Can't test the card because I'm having a hell of a time trying to configure this open transport correctly...
I was having issues with the card not being recognized by the installer software, but after some messing around, it was then detected.
I noticed the LED on the back of the card is constantly flashing at consistant intervals. If I power down and put a jumper on the the JP2 leads, the flashing stops.
I'm not sure which setting I need.
Can't test the card because I'm having a hell of a time trying to configure this open transport correctly...
