Skip to main content
Home▸ Forums▸ 68kMLA▸ Got 2 living-dead G3 iBooks — #1
Post #1 by protocol7
Source Forum68kMLA
CategoryHardware
Post DateSat, 12 Sep 2009 - 19:02
Original URLhttps://68kmla.org/bb/threads/got-2-living-dead-g3-ibooks.18532/
Post
I rescued 2 iBooks (dual-usb) today. The first is a 500Mhz one that boots into OF with

DEFAULT CATCH! code=300 at %SRR0: 0d005468 %SRR1: 40003030

mac-boot will then lead to

DEFAULT CATCH! code=900 at %SRR0: 2b5c214c %SRR1: 40003030

I can't boot from the Apple Hardware Test CD.

Tried the reset-nvram, set-defaults, reset-all commands too but still can't very far. When I try to get it further with mac-boot, I can hear the hard disk working away but every few seconds it will power off and then right back on again.

The second is a 800Mhz model (like my main one). It had a dead display initially (wouldn't even output to an external) but after poking at it with a big stick for a little while I now have a flashing system folder/question mark on-screen. This one doesn't want to boot my Hardware Test CD either but it seems a bit more functional.

cimg2470.jpg


Do any of these symptoms sound eerily familiar to any of you guys?

Update

Well, the big stick fix didn't last long. When I ejected the CD I got a band of horizontal lines up the right hand side of the screen (like a barcode) and now it's dead again. Wonder if has the famous logic board graphics problem after all.

mp.ls