Home▸ Forums▸ SCSI harddrive for my LC III?▸ SCSI harddrive for my LC III?
Thread

SCSI harddrive for my LC III?

SCSI harddrive for my LC III? Hardware 29 posts Sep 24, 2009 — Oct 9, 2009
View original thread
#1 Thu, 24 Sep 2009 - 01:23
My LC III's harddrive is waaay too small, so could anyone point me to an ebay auction for a compatible scsi hard drive? i can't seem to get any results.

#2 Thu, 24 Sep 2009 - 01:26
Search for "SCSI hard drive"

Anything with a 50 pin connector will work.

#4 Thu, 24 Sep 2009 - 02:09
It has a 50 pin connector, so I don't see why not.

#5 Thu, 24 Sep 2009 - 02:35
I meant "is this a *reliable* drive, or unreliable like the prodrives?"

#6 Thu, 24 Sep 2009 - 03:35
It looks like a full-height drive. I believe your LC will accept only half-height drives. Also, it's a micropolis, which means it's (a) old, ( B) probably very noisy, and © probably very unreliable.

#7 Thu, 24 Sep 2009 - 03:57
OK, could someone point me to a SCSI zip drive then? i still have a zip100 disk or two...

#8 Thu, 24 Sep 2009 - 06:38
Hard drives:

IBM SCSI HD

Seagate Hawk 2 GB

x2 Seagate Hawk 2.1 GB

or you can buy a cheaper large 68 pin HD (which are much easier to find cheap than native 50-pin hard drives) (example) and use a converter (example) with it.

For Zip drives, this one is nice.

If you can though, try to find a Zip 100 Plus, as they are compatible with both PC parallel ports and Mac SCSI ports.

#9 Thu, 24 Sep 2009 - 17:09
um... zoom waaay in on the pic, its a paralell drive

#10 Thu, 24 Sep 2009 - 17:14
I think i'll probebly get that 68pin and adaptor.

#13 Fri, 25 Sep 2009 - 01:11
I'll try to get the one w/ 22 disks. the cool thing bout Zip disks is i have a usb drive already.

#14 Fri, 25 Sep 2009 - 01:19
...and why would you waant 100 disks? is 22+the 1 i have not enough?!

#15 Thu, 1 Oct 2009 - 21:04
That lot of two Hawks is a good deal.
Click to expand...
Yesterday I've got Hawk for the bottle of beer it was better deal...

#16 Fri, 2 Oct 2009 - 00:23
The power supply in the LC III might be too tiny to support such a high-capacity drive.

And that threw me off when you deleted your post.

#17 Fri, 2 Oct 2009 - 00:32
The power supply in the LC III might be too tiny to support such a high-capacity drive.
Click to expand...
I've been running a 9.1 GB 50-pin SCSI Seagate in my LC 475 for quite a while now, and it's been fine.

#18 Fri, 2 Oct 2009 - 00:38
Would this one work w/ a 68-50 adaptor?

NEW Seagate 73GB Hard Drive - ST373207LW

SCSI Ultra320 - 320 Mbps - 10,000 RPM

Seagate Model / Part # ST373207LW

Capacity: 73GB

Rotational Speed: 10K

Seek Time: 4.7ms

Interface: U320 68-PIN SCSI

EDIT:

how about this one?

Detailed item info

Product Information

The Seagate Hawk 2LP 1.06 GB SCSI-2 Fast (8-bit) Hard Drive is fully compatible with PC systems.The Hard Drive connect by: SCSI-2 Fast (8-bit) for Internal utilization. Spinning up to 5400 RPM and offering capacity as large as 1.06 GB

Product MPN

MPN ST31230N

Key Features

Designation Desktop Computer

Capacity 1.06 GB

Interface SCSI

Enclosure Internal

HDD Form Factor 3.5" x 1/3H (Low Profile)

Spindle Speed 5400 RPM

Technical Features

External Data Transfer Rate 10 MBps

Seek Time 10.4 ms

Buffer Size 512 KB

Average Latency 5.56 ms

Interface (Detailed) SCSI-2 Fast (8-bit)

Other Features

Platform PC

Package Qty. 1

Dimensions

Height 0.99 in.

Width 4.02 in.

Depth 5.75 in.

Weight 1.54 lb.

#19 Fri, 2 Oct 2009 - 00:46
#1 won't work, because I think you can't run an Ultra-320 drive on the LC's PSU. (power constraints, etc.)

#2 is too big to fit.

#20 Fri, 2 Oct 2009 - 00:48
#1 won't work, because I think you can't run an Ultra-320 drive on the LC's PSU. (power constraints, etc.)
#2 is too big to fit.
Click to expand...
Whats the bigest that'll fit?

#21 Fri, 2 Oct 2009 - 00:52
oh, and why wont #2 fit? its a 1/3 hight and the lc3 can take up to 1/2 hight, right?

#22 Fri, 2 Oct 2009 - 00:57
...and i just measured and my lciii's is 1''x~4''x~6''

#23 Fri, 2 Oct 2009 - 01:00
Whoops, sorry. I mistook it for a full-height drive in some pics.

1/3rd height is the maximum height that will fit though.

What is the price?

#24 Fri, 2 Oct 2009 - 01:02
24.95+8.50 shipping, but if you can find a better deal on a compatible drive/adaptor if needed for $40 or less, let me know!

#25 Fri, 2 Oct 2009 - 01:20
24.95+8.50 shipping
Click to expand...
Ew, not worth it.

Let me dig up some cheaper drives.

#26 Fri, 2 Oct 2009 - 01:25
yeah...im about the worst ebay-searcher ever.

I hate eBay's search. It has a wierd syntax

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.