I'm not at home, so I can't upload the driver but . . .
. . . KnightTech is 404! BLEH!!!!!!!!!!!!!!!!!!!
IIRC, I've got all the RadiusWare downloads backed up on various Macs and I snagged a Full installation/Documentation set of one of the revs from macmetex fairly recently and I've got everything from the 7.0.1 Rocket/RocketShare era on Floppy w/Docs! [
] ]'>
I'll find out what's relevant and email it to you if necessary.
The cards have everything they need in their DeclROM to Flash the Radius Logo and load the drivers for the fixed resolutions I've tested as the first init/whatchamacallit loaded.
My original plan was to search out and swap any relevant crystal cans to try to slow the 66.6Hz or, preferably, the 75Hz 16" Rez down to 60Hz. But then again . . .
. . . I'm just a simple HardwareHacker/KnuckleDragger with an analog, vacuum tube based, video replay type brain. :
edit: Got TTL EPROM Burner/Reader?
. . . KnightTech is 404! BLEH!!!!!!!!!!!!!!!!!!!
IIRC, I've got all the RadiusWare downloads backed up on various Macs and I snagged a Full installation/Documentation set of one of the revs from macmetex fairly recently and I've got everything from the 7.0.1 Rocket/RocketShare era on Floppy w/Docs! [
] ]'>I'll find out what's relevant and email it to you if necessary.
The cards have everything they need in their DeclROM to Flash the Radius Logo and load the drivers for the fixed resolutions I've tested as the first init/whatchamacallit loaded.
My original plan was to search out and swap any relevant crystal cans to try to slow the 66.6Hz or, preferably, the 75Hz 16" Rez down to 60Hz. But then again . . .
. . . I'm just a simple HardwareHacker/KnuckleDragger with an analog, vacuum tube based, video replay type brain. :
edit: Got TTL EPROM Burner/Reader?