I think you mean "rabbet" the edge . . .No before pictures, sorry. The LC 575 bezel is pretty different than that of the Color Classic. The lower half looks similar to the CC bezel, but it has a large upper half that protrudes up and to the sides . . .
I don't know if you can tell from the picture on the back side of the bezel, but the edge is mitered about a 1/8". The whole bezel should be beveled, but since I cut off and used only the bottom half of the LC 575 bezel, it's not mitered around the top half so it doesn't quite fit when placed in.
````|____ <-- The edge of the bezel should look something like that.
. . . as that's the name for the joint you've done in ASCII art (nice job, btw [
] ]'> if I'm interpreting it correctly.http://woodworking.about.com/od/joinery/p/Rabbets.htm
I think the two paleolithic 15" AIOs I've been toying around with must be 575s, can't remember offhand, looks kinda like a Big@$$ StereoCC w/wings?
Have you got any adapters to mount your dremel to a board for a micro-router-table setup?
I'll start a "Hacks" thread w/pictures of what I did and how I home-brewed a router table to rabbet some plastics the way you appear to need to do. Just gotta right-(down)-size some 10 MP piccies of the two projects.
When I try to upload/downsize on ImageShack I ge . . . :simasimac:
Anybody know of a light-weight GraphicConverter type image editor for ubuntu on a 2GB RAM upgraded NetBook?
Methinks the GIMP's still a tad out of reach for my Mini. :
