Skip to main content
Home Forums 68kMLA My custom bezel for my Color Classic 575 — #7
Post #7 by olePigeon
Source Forum68kMLA
CategoryHardware
Post DateMon, 21 Dec 2009 - 08:02
Original URLhttps://68kmla.org/bb/threads/my-custom-bezel-for-my-color-classic-575.19344/
Post
Looks very good, have you got "before" piccies?Which part do you need to mitre?

:?:
No before pictures, sorry. The LC 575 bezel is pretty different than that of the Color Classic. The lower half looks similar to the CC bezel, but it has a large upper half that protrudes up and to the sides. I actually found out that the lower half section is about 1/8" wider than the CC bezels as well, so I had to sand it down and round the corners. Here's someone else's picture of the rear of the LC 575, you can get an idea of how big it was before:

000205-01-06cs.jpg.c5eb489f8aa20e53f289c47be3b043cb.jpg


I don't know if you can tell from the picture on the back side of the bezel, but the edge is mitered about a 1/8". The whole bezel should be beveled, but since I cut off and used only the bottom half of the LC 575 bezel, it's not mitered around the top half so it doesn't quite fit when placed in.

````|____ <-- The edge of the bezel should look something like that.

mp.ls