Bad flyback transformers symptoms

#1 Fri, 26 Feb 2010 - 04:13 68kMLA

What are some of the signs of a flyback transformer that is bad or going bad?

#2 Fri, 26 Feb 2010 - 04:22 68kMLA

weird noises, and screen flickering out

tho those are the same basic symptoms of flyback to control (analog board in some machines)

more detail please

#3 Fri, 26 Feb 2010 - 04:29 68kMLA

Failing flybacks can occasionally cause the screen to go out of focus too, or slowly shift focus as it warms up.

#4 Fri, 26 Feb 2010 - 15:44 68kMLA

weird noises, and screen flickering out
tho those are the same basic symptoms of flyback to control (analog board in some machines)

more detail please

Hmm..this sounds like the problems that were described to me. Screen flicker and buzzing sound. Good thing I have an analog board here with a good transformer attached. i'll just swap the whole thing out and worry about the actual transformer later.

#5 Fri, 20 Aug 2010 - 18:12 68kMLA

I have one that fizzes Nicola Tesla stylee (big blue arcs of HV) the sparks come from the triper (next to where the red HT cable is attached) to the scan coil cables, looks great in the dark. Kaput

#6 Sat, 21 Aug 2010 - 19:10 68kMLA

excessive shorted turns in the primary of the flyback will cause the flyback, and the horizontal output transistor to run excessively hot. Keep this in mind as well.... loose cores will cause very high frequency noises.