Skip to main content
Home Forums 68kMLA Getting shocked — #16
Post #16 by Bunsen
Source Forum68kMLA
CategoryTroubleshooting
Post DateThu, 25 Mar 2010 - 07:37
Original URLhttps://68kmla.org/bb/threads/getting-shocked.20241/
Post
Consider this before posting: Does every new topic have to turn into a rant about your favourite bugbear? Whether it is capitalism, socialism, planned obsolescence, Microsoft, Apple, or the guy at the bus stop with the odd body odour?

You can also buy a little device that looks like an oversize 3-prong plug that you simply plug into an outlet and lights on the device tell you if the outlet is wired properly.
productLarge_7825.jpg


Power Point and Leakage Tester - NB 240AV Australian plug version. Every workshop should have one. There are also smaller ones which like mac2geezer says are just a plug with some lights on the back.

I also run my workshop through an RCD - residual current device - in case any of the gear I am working on has faults. They measure the power throughput on the active line and compare it with the neutral. If there is any difference - meaning some power is going out to the workshop and not returning, for example, through you to ground - it shuts down the power in milliseconds. This can save your life. Newer houses and commercial premises may have one fitted at the switchboard.

mp.ls