Home▸ Forums▸ 68kMLA▸ SE/30 Analogue Board troubles. — #2
Post #2 by Mac128
Source Forum68kMLA
CategoryTroubleshooting
Post DateFri, 21 May 2010 - 16:55
Original URLhttps://68kmla.org/bb/threads/se-30-analogue-board-troubles.20612/
Post
Have you checked C15? Also the yoke Plug at P1 may be burned. Also, check and re-solder pin 4 of the P1 connector and check/re-solder the coil at L2. Pina also recommends vacuum-desoldering the coil at L3 and re-solder with the R19 repair, but presumably since yours checks out, there is no need to do any of that.

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.