Thank you for this link, Mac128.
I found the most interesting aspect to be in the auction's Schematic of the Vertical Sweep Section. For sake of comparison, have a look at the schematic in Figure 3 on page 5 of Tom Lee's Classic Mac Tech Info pdf. Specifically, note where the Emitter of Q4 connects, as well as the (-) side of CR7. On Tom Lee's schematic, the (-) side of CR7 is tied to +12v along with the Emitter of Q4. But in the schematic presented in the auction (created by Soft Solutions, I am assuming), the Emitter of Q4 goes to +12v but the (-) side of CR7 goes to Ground.
I found the most interesting aspect to be in the auction's Schematic of the Vertical Sweep Section. For sake of comparison, have a look at the schematic in Figure 3 on page 5 of Tom Lee's Classic Mac Tech Info pdf. Specifically, note where the Emitter of Q4 connects, as well as the (-) side of CR7. On Tom Lee's schematic, the (-) side of CR7 is tied to +12v along with the Emitter of Q4. But in the schematic presented in the auction (created by Soft Solutions, I am assuming), the Emitter of Q4 goes to +12v but the (-) side of CR7 goes to Ground.