I believe he stated the RAM was replaced (at $16 each? DAMN!).
Replacing a few IC fixed it so it now boots but Video is still bad.
If the CPU was bad, it would not be booting the machine. Does it have sound ("Bong" on power up)?
If it as a SE or SE\30, then it would be simple. What's the circuit that does the display on the 128K/512K/Plus?
Also, looks like the raster is too high - time to look at the analog board for that. Darken the screen to near black and then turn it up until you see a screen image but the unlit areas are as dark as possible from the control knob on the front and then adjust the analog board from there. Replace caps and de-seolder/re-solder joints as needed.
Replacing a few IC fixed it so it now boots but Video is still bad.
If the CPU was bad, it would not be booting the machine. Does it have sound ("Bong" on power up)?
If it as a SE or SE\30, then it would be simple. What's the circuit that does the display on the 128K/512K/Plus?
Also, looks like the raster is too high - time to look at the analog board for that. Darken the screen to near black and then turn it up until you see a screen image but the unlit areas are as dark as possible from the control knob on the front and then adjust the analog board from there. Replace caps and de-seolder/re-solder joints as needed.