Well, I have obtained a new hard drive for use with the SE/30. Unfortunately, that means more contending with the vagaries of SCSI configuration. Here's how it's sitting at the moment. The drive I bought is an IBM 92F0428 1GB drive (looks from what I can find like this is just a re-branded Maxtor.) Going by the label on the drive, there are five valid jumper positions: three for ID, one for termination, and one labeled "M" that I have no idea what it does (can't find any documentation for the drive, either.) When I hook it into my SE/30, HD SC Setup gives me the same spiel about being unable to find a hard drive, and I can't get Lido on the SE/30, since it requires System 6.0.4 or later and I only have 6.0.2 and 7.5, which won't let me eject the boot floppy.

I've also tried connecting the drive to my IIsi via an external enclosure (after changing the ID number however, this seems to drive it various forms of batty. If I leave the external enclosure off, I can boot the IIsi and get Lido loaded; however, as soon as I power it on and re-scan the bus, it freezes.

Can anybody help me figure out what to do here? I'm completely at a loss.