After having uniserver recap my Q840 board, I'm having the exact same problems as epoxy2600.
No internal or external SCSI drive will mount at startup - and I've already confirmed the drives are good on the Q950. All I get after the RAM test is the blinking ?. The computer also booted successfully before the recap, but was showing clear signs of cap leakage.
The floppy drive will not boot a Disk Tools disc -- could be a bad floppy drive. I have yet to test one I know is working.
Sounds like the cap goo was on there too long.
I don't have a SCSI card to test from, and the ones on eBay are all $40-$50. Going to post in the Trade Forum to see if anyone has one they'd be willing to sell or trade.
Has ANYONE had any luck repairing these boards? Talk about feeling defeated... gah.
No internal or external SCSI drive will mount at startup - and I've already confirmed the drives are good on the Q950. All I get after the RAM test is the blinking ?. The computer also booted successfully before the recap, but was showing clear signs of cap leakage.
The floppy drive will not boot a Disk Tools disc -- could be a bad floppy drive. I have yet to test one I know is working.
Sounds like the cap goo was on there too long.
I don't have a SCSI card to test from, and the ones on eBay are all $40-$50. Going to post in the Trade Forum to see if anyone has one they'd be willing to sell or trade.
Has ANYONE had any luck repairing these boards? Talk about feeling defeated... gah.