Battery leak?

Bought a PowerBook 190 some days ago and that's what I found:



Help xx(

My 5300 was in the same state when i get it.

Not an easy thing to get it right, try to dismantle the unit and clean the mess.

How did you clean it? Did you use any product?

Thanks.

Not really, the damage was done anyway, so i cleaned the best i could.

NiCd and NiMH electrolyte is alkaline, so an acid is good to neutralize it. I use plain white vinegar to clean up battery leaks, followed by a good scrub with warm soapy water and thorough drying.

I tried to clean as much as I could, some contacts were broken due to corrosion. I couldn't clean everything.

Also found a small amount of that blue stuff on a chip near the battery compartment, I didn't want to touch it to avoid damage. Leaving that there will damage the PowerBook?

Is there any way to cover the empty battery compartment?

I don't want to put the old battery that caused all the mess. It wouldn't make sense to buy a new battery because I wouldn't be able to use it since some contacts are broken.

Thanks for your help

Is there any way to cover the empty battery compartment?

Click to expand...

I removed the battery pack from the original battery, leaving just the plastic empty enclosure.

That way i had an almost original Powerbook.

One of the my contacts were broken too.

I couldn't open the battery, I'll have to find another solution.

Anybody has an empty battery enclosure?

You had to cut the plastic with a sharp blade or better, then glue both parts together again.

Thanks all for your help, finally I could open it and remove the inner batteries.

Now the battery compartment is covered