uniserver....
Thanks for the link. Because I only have my CC, I was unable to down load lido7 into a Macintosh computer. So I down loaded it to my PC, and burned a CD, then put the CD in my CC CD drive as I booted to a boot floppy. But the Mac would not see the CD. I am running out of money fast, but if I had another Mac, I could have probably done this. I don't know of a way to get lido7 onto a floppy or a CD and move it to my CC. I will keep working on this. Thanks for the software.
Elfen....
Thanks again for your help. I have turned off blind writes all the time I have been trying to format my CF card. Good info. Thanks for that.
I have made my partitions 1.5GBs. Still not joy. What is odd, is that I can use "Disk First Aid" and it sees the drives, and it can repair them. Disk First Aid sees nothing to repair. It always says the drives appear to be OK.
Skipping Anubis Plus V 3.0.1 for a little bit, I tried some of what I believe are apple branded formatting utilities which I just bought.
They are:
1) HD SC Set up (it can not see any SCSI Iinternal drives, but it sees my SCSI external CD drive)
1) Internal HD Format V 1.3 (same as above)
3) Drive Set Up 1.5. This software will see and split up my CF card. I break down the CF card into 1.5GB partition. After I do this the drives appear on my desktop. Disk First Aid can see them, and when I run verify or repair, Disk First Aid says the drives are fine.
I also have Drive Set up 1.7.3 but I have not tried that yet.
When I format my CF card with Drive Set up 1.5, and then reboot using my boot CD, I can see the drives on my desktop. When I stick in System 7.5.3 68K Disk Tools floppy (1 of 2), I can run Disk First Aid (7.2.2.DT) and it will see the drives and test them as OK. When I run Apple Hard Drive Set up (7.3.5) on the 7.5.3 Tools floppy, it can not see any internal SCSI devices in my computer. I tried going ahead with the install of a stack of floppies for 7.5.3, but it will always fail before it gets to about the 1/2 way point.
I still think I am doing something wrong when I format using Anubis Plus V 3.0.1. But I do not know what it is. Drive Set up seems to be a no brainier, but maybe it is a new formatting process that 7.5.3 can not see (??).
Another option in Anubis Plus V 3.0.1, is that it says it can format my CF and make it as a removable drive as well. I have not tied that options.
Any suggestions?
What software do you use to format your CF cards?
Thanks again for all the great help.
jack
Thanks for the link. Because I only have my CC, I was unable to down load lido7 into a Macintosh computer. So I down loaded it to my PC, and burned a CD, then put the CD in my CC CD drive as I booted to a boot floppy. But the Mac would not see the CD. I am running out of money fast, but if I had another Mac, I could have probably done this. I don't know of a way to get lido7 onto a floppy or a CD and move it to my CC. I will keep working on this. Thanks for the software.
Elfen....
Thanks again for your help. I have turned off blind writes all the time I have been trying to format my CF card. Good info. Thanks for that.
I have made my partitions 1.5GBs. Still not joy. What is odd, is that I can use "Disk First Aid" and it sees the drives, and it can repair them. Disk First Aid sees nothing to repair. It always says the drives appear to be OK.
Skipping Anubis Plus V 3.0.1 for a little bit, I tried some of what I believe are apple branded formatting utilities which I just bought.
They are:
1) HD SC Set up (it can not see any SCSI Iinternal drives, but it sees my SCSI external CD drive)
1) Internal HD Format V 1.3 (same as above)
3) Drive Set Up 1.5. This software will see and split up my CF card. I break down the CF card into 1.5GB partition. After I do this the drives appear on my desktop. Disk First Aid can see them, and when I run verify or repair, Disk First Aid says the drives are fine.
I also have Drive Set up 1.7.3 but I have not tried that yet.
When I format my CF card with Drive Set up 1.5, and then reboot using my boot CD, I can see the drives on my desktop. When I stick in System 7.5.3 68K Disk Tools floppy (1 of 2), I can run Disk First Aid (7.2.2.DT) and it will see the drives and test them as OK. When I run Apple Hard Drive Set up (7.3.5) on the 7.5.3 Tools floppy, it can not see any internal SCSI devices in my computer. I tried going ahead with the install of a stack of floppies for 7.5.3, but it will always fail before it gets to about the 1/2 way point.
I still think I am doing something wrong when I format using Anubis Plus V 3.0.1. But I do not know what it is. Drive Set up seems to be a no brainier, but maybe it is a new formatting process that 7.5.3 can not see (??).
Another option in Anubis Plus V 3.0.1, is that it says it can format my CF and make it as a removable drive as well. I have not tied that options.
Any suggestions?
What software do you use to format your CF cards?
Thanks again for all the great help.
jack