Hi,
was that on OCAU?
I picked up two PB G4s off there recently, one was a PB Ti 667, which I got working 100% by cleaning the RAM slots. Fixed it up, gave to a friend - total cost about $40! It was in good nick too.
The other - a 1.2Ghz PB Alu model - worked OK, but wouldn't start up after being used for a while - probably PMU/motherboard fault which I could not diagnose.
With yours, I'd pull the RAM first, and see how you go running off a single stick. The top RAM slot often fails in these models. Try also a power manager and PMU reset.
JB
was that on OCAU?
I picked up two PB G4s off there recently, one was a PB Ti 667, which I got working 100% by cleaning the RAM slots. Fixed it up, gave to a friend - total cost about $40! It was in good nick too.
The other - a 1.2Ghz PB Alu model - worked OK, but wouldn't start up after being used for a while - probably PMU/motherboard fault which I could not diagnose.
With yours, I'd pull the RAM first, and see how you go running off a single stick. The top RAM slot often fails in these models. Try also a power manager and PMU reset.
JB