Skip to main content
Home Forums 68kMLA Help diagnose an LC problem — #8
Post #8 by ojfd
Source Forum68kMLA
CategoryTroubleshooting
Post DateTue, 15 Nov 2011 - 21:10
Original URLhttps://68kmla.org/bb/threads/help-diagnose-an-lc-problem.24197/
Post
Perhaps the most important tip is for you to get TWO soldering irons. Simple pencil

irons will work, and they're really cheap. Like $10 or $15. If you don't use two soldering irons at the same time, then I can pretty much guarantee you'll tear off one of the little pads under the capacitor.

I lost three motherboards to that problem before it donned on me to use two soldering irons (duh!)
Two are better than one? He he.. Yes, it could be done, but, better yet:

1. Use desoldering wick.

2. Practice a lot on scrap boards.

3. Read this article.

http://www.daycounter.com/Articles/Solder-Surface-Mount-Parts.phtml

wick_1.jpg

wick_2.jpg

mp.ls