TechKnight, could you verify what my eyes are seeing in the original pic? Under the Battery Box, right of the ROM SIMM, D1 and D2 look like they are solder bridged over.
Snake88USA, one step at a time. Like I asked TechKnight - look at D1 and D2. If they are bridge-soldered over put some solder braid and flux to remove it. On my SE/30 board it should be 3 solder points on those two things. And Snake - you got the same can-style caps to recap the board? Check your caps and see that the solder is not shorting out against the can. Remove solder as needed to clear the can without desoldering the cap.
Snake88USA, one step at a time. Like I asked TechKnight - look at D1 and D2. If they are bridge-soldered over put some solder braid and flux to remove it. On my SE/30 board it should be 3 solder points on those two things. And Snake - you got the same can-style caps to recap the board? Check your caps and see that the solder is not shorting out against the can. Remove solder as needed to clear the can without desoldering the cap.