Thanks bibilit and uniserver.

I went to the DIY store and Halfords (auto factors) but they had no such tools. Maplins (Ireland/UK store like Radioshack) had longer T15 screwdriver bits.

I bought a set of these and the T15 was long enough and narrow enough at the end to get at the top screws.



Got it open





Could not see any particularly bad solder except for one resistor that seemed to not be fully soldered.





Soldered it up, let it cool, put the back case back on, turned it on but the screen still wont show. Taps to the right of the case and sometimes a flicker will show, but still no video xx(