@ pondosinatra

I have no idea who did your mainboards, obviously it wasn't me.

but i kinda feel for the poor sap that got stuck doing them, then to hear your belly aching,

money aside, ( gosh i don't want to appear mean or anything, but it might come out that way )

Basically be happy your se/30 boards work at all.

you have no idea how much of a pain in the ass it can be dealing with rotted traces, and rotted pads, it sucks!

+ solder really does not want to stick to anything with corrosion on it.

With the SE/30 you have to be extra careful with your soldering, there are traces going all over the place, some of the time the PCB epoxy is peeling off, and ya need to be extra careful not to solder bridge any of those little traces, under the cap, right next to the cap. etc.

You need a steady hand, some of those caps are a real MF-ER to get to.

Next time you can just save a couple bucks, and just do it your self, then you will see

Start with the cpu card, then if you mess it up, you only have your self to blame,

not some poor sap that was kind enough to help you out.

Caps! -- (Supplies For Beginners) What do you need?

http://68kmla.org/forums/viewtopic.php?f=29&t=19844&start=0