Skip to main content
Home Forums G3 AIO Power Supply Jumper — #6 G3 AIO Power Supply Jumper — #6
Post #6 by coius
Source ForumG3 AIO Power Supply Jumper — #6
CategoryPowerPC
Post DateWed, 12 Sep 2012 - 03:59
Original URLhttps://68kmla.org/bb/threads/g3-aio-power-supply-jumper.26182/
Post
The AIO doesn't use the Gossamer logic board, but it was developed at the same time.
Excuse me? yes it does. The only difference is how the screen is hooked up. It goes through the Whisper/Personality card on that header with the clips. In fact it's so similar, I transfered mine to a G3 minitower which eissenfaust88 here on the forum has. I also upgraded it with a G4 Zif. It's the EXACT same board as the rest of the G3 towers, except with a lower end config and a built in screen that attaches to the personality card.

You can see evidence just on the card that goes into the personality slot on any G3. That 9/15 pin header with the clips is just for the monitor on the AIO to connect.

the iMac on the other hand is drastically different. I would akin it slightly more to the blue and white over the beige G3 though.

mp.ls