Skip to main content
Home Forums 68kMLA Powerbook 100 Battery Rebuild
Thread

Powerbook 100 Battery Rebuild

68kMLA Troubleshooting 29 posts Sep 25, 2015 to May 9, 2020
Ok... so on this board I have not seen a PB100 battery rebuild.. But I did see another forum with a solution someone did... Any help here is greatly appreciated... Any ideas on where to get a thin enough battery to work... a AAA size is just a little too big... Perhaps connect multiple flat cell phone batts together?? Also I am not sure what to use for a battery and the resistance and where to place the resistors... (duhh.. I know)... The old ones are these little rectangular black cells... strange.. probably custom..

Here is my disassembled pack.. It says that it is a 6V 1600mah NI-MH battery in my battery pack... but the other guy put a 7.2V 1000mah

PB100batt.jpg

The other guy's battery which he has a 7.2V 1000mah

battery.jpg

ANY HELP OR INPUT GREATLY APPRECIATED!!!

I know the charger outputs 7.5v and 2 amps but that is the charger which is always a little more... The PB I think calls for 6V at 1600mah

I am assuming each cell is 1.2v and totaling 5 is your 6v... so there are two 6v sets in the battery pack.. but to find 1.2v flat batteries... hmmm... or another solution?

18906-Of-Course-I-Talk-To-Myself.png.c785956a82b3a95319876b60ff062ead.png


Exactly Mike & Charles.. Sorry just thinking aloud.. But I hope this helps anyone who wants to rebuild a PB100 battery... I'll do more editing moving forward.. Lol.. Since you two are the EXPERTS.. Any suggestions???

Monologging isn't necessarily bad, especially if it's thought process, a worklog, or if new information comes up before anybody else posts.

mp.ls