Thread
Caps! -- Macintosh Portable /w back light
This LB seem's a little strange compared to the non back light one.
4 - 1uf-50v
2 - 10uf-16v
1 - 220uf-25v
4 - 47uf-16v
1 - 4.7uf-25v
2- 470uf-25v
4 - 100uf-25v
4 - 1uf-50v
2 - 10uf-16v
1 - 220uf-25v
4 - 47uf-16v
1 - 4.7uf-25v
2- 470uf-25v
4 - 100uf-25v
Ya I read some where it had a bunch of differences.
Be careful in this area: ** For only the m5126 **
For some reason they ran traces literally right next to and in between the pads, just like how they did with the se/30,
so be very careful your caps are on square and do not over solder. Or else you will end up with a solder bridge
and Insto-sad-mac when you power it on.
Also keep in mind, Insto-sad-mac can still be from more serious issues.
For some reason they ran traces literally right next to and in between the pads, just like how they did with the se/30,
so be very careful your caps are on square and do not over solder. Or else you will end up with a solder bridge
and Insto-sad-mac when you power it on.
Also keep in mind, Insto-sad-mac can still be from more serious issues.