OK. I've gotten past my fear of CRTs and I've discharged and removed the analog board. I've also used a wire to verify all capacitors are discharged. So now I'm ready to begin replacing capacitors. I am about go to Radio Shack and/or Fry's to hunt down some caps. Whichever ones I can't find I'll order from Mouser. I thought I'd through a couple of photos up here that way if anyone sees anything I should pay attention to, they can let me know. Also the transformer has a lot of "gunk" on it. I don't know if this is normal or if that means it has burned up. So I took a closeup of that also: