I found it, thanks!
I have reset it (unplug, hold down for 20 seconds), reseated the CPU card firmly and then zapped PRAM.
I am using an HP 2011x which I have working perfectly with my G3MT. I am using the exact graphics card from the G3. The machine boot chimes, and then the clock is not set beep after it gets to the desktop but screen remains dark. I am base config, 2x 64MB RAM chips, power, VGA, ADB mouse/keyboard.
I am using the same battery that I have in the G3. it was a pull from a Quicksilver for testing to get the G3 up and running.
I am not sure what other troubleshooting steps to take as the PRAM/CUDA reset accomplished nothing. I went through this with the G3 using every PCI video card I could think of. It was not until I put in the Radeon 9200 that I was able to get output to the display with that machine but even that was not enough to pull an output from the 8600.
I have reset it (unplug, hold down for 20 seconds), reseated the CPU card firmly and then zapped PRAM.
I am using an HP 2011x which I have working perfectly with my G3MT. I am using the exact graphics card from the G3. The machine boot chimes, and then the clock is not set beep after it gets to the desktop but screen remains dark. I am base config, 2x 64MB RAM chips, power, VGA, ADB mouse/keyboard.
I am using the same battery that I have in the G3. it was a pull from a Quicksilver for testing to get the G3 up and running.
I am not sure what other troubleshooting steps to take as the PRAM/CUDA reset accomplished nothing. I went through this with the G3 using every PCI video card I could think of. It was not until I put in the Radeon 9200 that I was able to get output to the display with that machine but even that was not enough to pull an output from the 8600.