basically you can solder a scsi cable to the scsi chip, also use a external psu, and solder that right to the power switch.

maybe install a pie fan in there some where to help with the heat.

I started a thread here.- http://68kmla.org/forums/viewtopic.php?f=7&t=19431

Now that i know much more about scsi cables, with doing the macintosh portable 34-50pin cables, I could get it to work now.

I'm less motived only because i have a really cool 512ke that has been upgraded with a SCSI MacSnap, and a 2mb memory mac snap.

i have a zip drive in there it works out great as a boot drive. and the Zip Drive is great because it will stop spinning if you are not accessing it.

Also Zip drives do not get hot, and they do not consume much power.