If you have not already, clean off the old CPU heat sink grease between the PPC601 and the heat sink and apply a dab of new heat sink compound. The most common failure mode I've seen in the 7100 is for the heat sink grease to turn to powder adn stop doing its job and then the CPU starts overheating.
Post #4 by trag
| Source Forum | 7100/66 — #4 |
|---|---|
| Category | Hardware |
| Post Date | Fri, 18 Oct 2013 - 22:14 |
| Original URL | https://68kmla.org/bb/threads/7100-66.28815/ |
Post