Kinda gonna answer these in reverse.
Termination is needed at the end of the chain. Whatever device you put at the end must have termination somehow. SCSI zips are nice as they have a switch to do that so putting them at the end of the chain is great. Anything in the middle of the chain should have no termination power or switches or they will end the chain.
You will defiantly need cables to have more than 1 device, pick the ay you want to do it so you can identify what you will need.
You can solder the wires right to the hard drive rather than trying to put pins on that will most likely snap right back off when you try and slide the cable on. Just cut the connector off, strip a little of the wire off and solder right to where the pins were.
Termination is needed at the end of the chain. Whatever device you put at the end must have termination somehow. SCSI zips are nice as they have a switch to do that so putting them at the end of the chain is great. Anything in the middle of the chain should have no termination power or switches or they will end the chain.
You will defiantly need cables to have more than 1 device, pick the ay you want to do it so you can identify what you will need.
You can solder the wires right to the hard drive rather than trying to put pins on that will most likely snap right back off when you try and slide the cable on. Just cut the connector off, strip a little of the wire off and solder right to where the pins were.