Home▸ Forums▸ Macintosh 128k Restoration: Help! — #4▸ Macintosh 128k Restoration: Help! — #4
Post #4 by sadmanonatrain
Source ForumMacintosh 128k Restoration: Help! — #4
CategoryHardware
Post DateTue, 15 Oct 2013 - 08:00
Original URLhttps://68kmla.org/bb/threads/macintosh-128k-restoration-help.29045/
Post
Could you try disconnecting the analog board from the logic board, then measure the voltages on the analog board connector? That would at least tell you which board you need to troubleshoot.
Click to expand...
When I tested the voltages on the floppy port they all read under 1.0v (more like 0.50v).

I will try measuring the voltages directly from the analog board later today them report back!

Thank you

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.