Iicx Power Supply Clicks, no go — #25

Post #25 by unity

Source Forum	Iicx Power Supply Clicks, no go — #25
Category	Hardware
Post Date	Tue, 28 Jan 2014 - 04:01
Original URL	https://68kmla.org/bb/threads/iicx-power-supply-clicks-no-go.29693/

Post

6 and 7 are tied together, to ground.
Now, since you got a different result between 1 and 8, that means the +12V is split into 2 separate rails.

Now, are you doing this in ohms? or are you doing this in diode check? Ohms isnt a valid measurement in diode check, and the results mean something totally different. if you are measuring in DIODE CHECK, then 165 isnt bad. thats actually ok. .045 in diode check is bad.

Diode, cause that is why you said to use before to look for 000 across rails. I will recheck with actual ohm setting:

Pin 5 to 4,3,2 = 47.3 ohm

Pin 1 to 6 or 7 = 166.5 ohm

Pin 1 to 8 = 487 ohm

Pin 8 to 6 or 7 = 323 ohm