Home▸ Forums▸ Macintosh Plus boot problem - Maybe a cracked solder? — #12▸ Macintosh Plus boot problem - Maybe a cracked solder? — #12
Post #12 by genie_mac
Source ForumMacintosh Plus boot problem - Maybe a cracked solder? — #12
CategoryHardware
Post DateMon, 27 Jan 2014 - 21:55
Original URLhttps://68kmla.org/bb/threads/macintosh-plus-boot-problem-maybe-a-cracked-solder.29713/
Post
It seems like the front frame may be a little damaged and the back is not fitting anymore in the correct way, as I noticed from the beginning that, when the Mac is closed, the bottom right corner of the machine is a little "open", in a non-symmetrical way if you look at the bottom left corner.
Click to expand...
Quite possible that the vinyl sleeve is not inserted properly and gets caught by the rear bucket. The sleeve needs to be pushed into the little plastic thingies that hold the analogue board.

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.