Home▸ Forums▸ SE/30 with SCSI problem after warming up. Error 41 — #16▸ SE/30 with SCSI problem after warming up. Error 41 — #16
Post #16 by BEU
Source ForumSE/30 with SCSI problem after warming up. Error 41 — #16
CategoryHardware
Post DateThu, 17 Dec 2015 - 10:08
Original URLhttps://68kmla.org/bb/threads/se-30-with-scsi-problem-after-warming-up-error-41.3095/
Post
Thank You for information uniserver.

So probably the NCR chip is still working.

I used solder wick to clean the pads and aceton for the board. Solder with Pb and flux. Hope that will be sufficient for some years.

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.