Home▸ Forums▸ Gigabit Ethernet logicboard with Quicksilver CPU — #5▸ Gigabit Ethernet logicboard with Quicksilver CPU — #5
Post #5 by jholt5638
Source ForumGigabit Ethernet logicboard with Quicksilver CPU — #5
CategoryHardware
Post DateSat, 4 Oct 2014 - 22:54
Original URLhttps://68kmla.org/bb/threads/gigabit-ethernet-logicboard-with-quicksilver-cpu.316/
Post
Ok so I will have to remove the secondary ATA connector and ether solder a extension to the board or just move the Optical drive to the slave position on the primary. Probably cut the connector and  just move the drive would be the easiest solution. I'm not confident enough in my solder skills to start poking around on the logicboard doing the ATX to GBE PSU mod and Overclocking my 400MHz to 450MHz was nerve wracking enough lol

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.