All I have at my disposal is a 15W soldering iron, rosin core solder, and wire stripper/cutter so cutting looks like the way I will go.
I found that site before when I was looking for the proper pinout for my ATX PSU to GBE I ended up it and another source so I don't have a wall wart coming out of my case. I took a +12V rail and the +5V Standby rail with a couple of 50V 1A PNI Diodes and wired it up to the +28V pin on the GBE logicboard works good though it prevents me from using ADC monitors and Firewire would be iffy according to the information I read. I may still switch to using the wallwart if I ever find a decent priced original iSight camera
I found that site before when I was looking for the proper pinout for my ATX PSU to GBE I ended up it and another source so I don't have a wall wart coming out of my case. I took a +12V rail and the +5V Standby rail with a couple of 50V 1A PNI Diodes and wired it up to the +28V pin on the GBE logicboard works good though it prevents me from using ADC monitors and Firewire would be iffy according to the information I read. I may still switch to using the wallwart if I ever find a decent priced original iSight camera