Let me know if that link doesn't work for you. I have a copy of this driver also, its one of the harder ones to find. It took me a good 3-4 days to find it online. And I found it on a mirror of a mirror.
I have the same card in my SE/30 so this is the driver you need:
http://s000.tinyupload.com/index.php?file_id=95896423622936482552
This card works best in 7.5.5. What I did:
1. Installed 7.1 -> 7.5.3 -> 7.5.5 (I use a Doug3 rom so I had to patch 7.5.3 and 7.5.5 to work on my mac which has full 32-bit addressing.)
2. Installed the driver above
3. Installed Open Transport 1.3, Appleshare client 3.7.4
4. Connected a 10 Base T ONLY hub to my router. These cards cannot link to modern hubs, routers, or switch, because they normally will not downgrade their signal to 10-base-T. My solution was to buy a 10-base-T ONLY hub from the early 90's made by D-Link.
5. Headed to TCP/IP and set Connect via DHCP. If you have a solid green light on your PDS then you should be good to go with this. If not, you will need to manually enter this information.
This honestly took me a good week - week and a half to get right. I am not as techy as some people here I realise that, but I think its a fairly finicky thing to do. Good luck let me know if I can help.
I have the same card in my SE/30 so this is the driver you need:
http://s000.tinyupload.com/index.php?file_id=95896423622936482552
This card works best in 7.5.5. What I did:
1. Installed 7.1 -> 7.5.3 -> 7.5.5 (I use a Doug3 rom so I had to patch 7.5.3 and 7.5.5 to work on my mac which has full 32-bit addressing.)
2. Installed the driver above
3. Installed Open Transport 1.3, Appleshare client 3.7.4
4. Connected a 10 Base T ONLY hub to my router. These cards cannot link to modern hubs, routers, or switch, because they normally will not downgrade their signal to 10-base-T. My solution was to buy a 10-base-T ONLY hub from the early 90's made by D-Link.
5. Headed to TCP/IP and set Connect via DHCP. If you have a solid green light on your PDS then you should be good to go with this. If not, you will need to manually enter this information.
This honestly took me a good week - week and a half to get right. I am not as techy as some people here I realise that, but I think its a fairly finicky thing to do. Good luck let me know if I can help.